INDUSTRIAL M2M LTE GATEWAY TRB245

MOBILE

Mobile module

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

SIM switch

2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail

Status

Signal strength, Connected band, SINR, RSRP, RSRQ, Bytes sent/received

Bridge

Direct connection (bridge) between mobile ISP and device on LAN

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS (planned), SMS autoreply

USSD

Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list (planned)

Operator black/white list

Multiple PDN

Possibility to use different PDNs for multiple network access and services

Band management

Used band status display, Band lock (planned)

APN

Auto APN

ETHERNET

LAN

1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover (Configurable to work as WAN port)

NETWORK

Routing

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned)

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL)

VoIP passthrough support (planned)

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring

Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

Port forward, traffic rules, custom rules

QoS / Smart Queue Management (SQM) (planned)

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS

Supported >25 service providers, others can be configured manually

SSHFS (planned)

Possibility to mount remote file system via SSH protocol

SECURITY

Authentication

Pre-shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN (planned)

Tag based VLAN separation

Mobile quota control

Custom data limits for both SIM cards

WEB filter (planned)

Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN

Multiple clients and server can be running simultaneously, 12 encryption methods

OpenVPN Encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPSec

IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE

GRE tunnel

Stunnel

Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

PPTP, L2TP

Client/Server services can run simultaneously, L2TPv3 support

DMVPN

Method of building scalable IPsec VPNs

SSTP

SSTP client instance support

ZeroTier

ZeroTier VPN client support

SERIAL COMMMUNICATION MODES

Modes

Console, OverIP, Modem (planned), Modbus RTU master, Modbus gateway, NTRIP client (planned)

MODBUS

MODBUS TCP SLAVE

ID filtering

Respond to one ID in range [1;255] or any

Allow remote access

Allow access through WAN

Custom registers

Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality

MODBUS TCP MASTER

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

MODBUS RTU MASTER

Supported baud rates

From 300 to 3000000

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Number of data bits

7 or 8

Number of stop bits

1 or 2

Parity bits

None, Even, Odd

Flow control

None, RTS/CTS (only for RS232 interface), Xon/Xoff

MQTT GATEWAY

Gateway

Allows sending commands and receiving data from Modbus Master trough MQTT broker

DATA TO SERVER

Protocols

HTTP(S), MQTT, Azure MQTT, Kinesis

MONITORING & MANAGEMENT

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA

Firmware update from server, automatic notification

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call

Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer

TR-069

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT

MQTT Broker, MQTT publisher

SNMP

SNMP (v1, v2, v3), SNMP Trap

JSON-RPC

Management API over HTTP/HTTPS

Modbus

Modbus TCP status/control

RMS

Teltonika Remote Management Systems (RMS)

IoT PLATFORMS

Cloud of Things

Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx

Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity

Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP

Azure IoT Hub

Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

SYSTEM CHARACTERISTICS

CPU

Qualcomm QCA9531, MIPS 24kc, 650 MHz

RAM

64 MB, DDR2

Flash storage

16MB SPI Flash (4 MB available for user)

FIRMWARE / CONFIGURATION

WEB UI

Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA

Update FW/configuration from server

RMS

Update FW/configuration for multiple devices

Keep settings

Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

Operating system

RutOS (OpenWrt based Linux OS)

Supported languages

Busybox shell, Lua, C, C++

Development tools

SDK package with build environment provided

LOCATION TRACKING

GNSS

GPS, GLONASS, BeiDou, Galileo and QZSS

Coordinates

GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA

NMEA 0183

NTRIP (planned)

NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

Server software

Supported server software TAVL, RMS

Mobile Network Geolocating

Location without using GPS, get approximate location based on mobile tower on RMS

Geofencing

Configurable multiple geofence zones

INPUT/OUTPUT

Configurable I/O

3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA

Analog input

1 x Analog input (0 - 30 V)

Events

SMS, Email

Output control

HTTP POST/GET, Schedule

I/O juggler

Allows to set certain I/O conditions to initiate event

SERIAL

RS232

Terminal block connector: TX, RX, RTS, CTS

RS485

Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)

Supported baud rates

From 300 to 3000000

Number of data bits

7 or 8

Number of stop bits

1 or 2

Parity

None, Even, Odd

Flow control

None, RTS/CTS (only for RS232 interface), Xon/Xoff

POWER

Connector

2 pins in 16 pin industrial terminal block

Input voltage range

9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max

Power consumption

Idle: <1.2 W, Max: <5 W

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTON, SIM)

Ethernet

1 x RJ45 port, 10/100 Mbps

I/O’s

3 x Configurable I/O, 1 x Analog input in 16 pin terminal block

Status LEDs

3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED

SIM

2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray

Power

2 pins in 16 pin terminal block

Antennas

1 x SMA connector for LTE, 1 x SMA connector for GNSS

RS232

4 pins in 16 pin terminal block (TX, RX, RTS, CTS)

RS485

4 pins in 16 pin terminal block (D+, D-, R+, R-)

Reset

Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

Casing material

Aluminium housing with DIN rail mounting option

Dimensions (W x H x D)

83 x 25 x 74.2 mm

Weight

165 g

Mounting options

DIN rail, wall mounting (additional kits needed), flat surface placement

OPERATING ENVIRONMENT

Operating temperature

-40 ℃ to 75 ℃

Operating humidity

10% to 90% non-condensing