INDUSTRIAL RUGGED LTE RS485 GATEWAY TRB145

MOBILE

Mobile module

4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

Bridge

Direct connection (bridge) between mobile ISP and device on LAN

Status

Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received

SMS/Call

SMS status, SMS configuration, Call utilities

NETWORK

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, PPP, SSH, DHCP, SNMP, MQTT

Connection monitoring

Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget

Routing

Static routing

Firewall

Port forwards, traffic rules, custom rules

DHCP

Static and dynamic IP allocation

QoS / Smart Queue Management (SQM) (planned)

Traffic priority queuing by source/destination, service, protocol or port

DDNS

Supported >25 service providers, others can be configured manually

SECURITY

Authentication

Pre-shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T

Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN

Multiple clients and a server can run simultaneously, 12 encryption methods

OpenVPN Encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec

IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE

GRE tunnel

PPTP, L2TP

Client/Server services can run simultaneously

SERIAL COMMUNICATION MODES

Modes

Console, OverIP, Modem (Full or Partial control) (planned), Modbus RTU master, Modbus gateway, NTRIP client (planned)

MODBUS

MODBUS TCP SLAVE

ID filtering

Respond to one ID in range [1;255] or any

Allow remote access

Allow access through WAN

Custom registers

Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality

MODBUS TCP MASTER

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS RTU MASTER

Supported baud rates

From 300 to 115200

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

Number of data bits

From 5 to 8

Number of stop bits

1 or 2

Parity

None, Even, Odd

Flow control

None, Xon/Xoff

MODBUS DATA TO SERVER

Protocols

HTTP(S), MQTT

MONITORING & MANAGEMENT

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log

FOTA

Firmware update from sever, automatic notification

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration

MQTT

MQTT Broker, MQTT publisher

JSON-RPC

Management API over HTTP/HTTPS

Modbus

Modbus TCP status/control

RMS

Teltonika Remote Management System (RMS)

SYSTEM CHARACTERISTICS

CPU

ARM Cortex-A7 1.2 GHz CPU

RAM

128 MB (50 MB available for userspace)

FLASH memory

512 MB (200 MB available for userspace)

FIRMWARE / CONFIGURATION

WEB UI

Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA

Update FW/configuration from server

RMS

Update FW/configuration for multiple devices

Keep settings

Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

Operating system

RutOS (OpenWrt based Linux OS)

Supported languages

Busybox shell, Lua, C, C++

Development tools

SDK package with build environment provided

INPUT/OUTPUT

Configurable I/O

2 x Digital Inputs/Outputs (I/O not available in TRB145*2****)

Events

SMS status

POWER

Connector

4 pin industrial DC power socket

Input voltage range

9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max

Power consumption

< 5 W

PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)

RS485

RS485 interface, Full Duplex (4 wires) and Half Duplex (2 wires), baud rate 300-115200

I/Os

2 Inputs/Outputs pin on 4 pin power connector (I/O not available in TRB145*2****)

USB

Virtual network interface via USB

Status LEDs

3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED

SIM

1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V

Power

4 pin power connector with 2 x configurable Digital Inputs/Outputs (I/O not available in TRB145*2****)

Anntenas

1 x SMA for LTE

Reset

Restore factory settings button

PHYSICAL SPECIFICATIONS

Casing material

Aluminum housing

Dimensions

64.4 x 74.5 x 25 mm (L x W x H)

Weight

130 g

Mounting options

Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options

OPERATING ENVIRONMENT

Operating temperature

-40 °C to 75 °C

Operating humidity

10 % to 90 % non-condensing

Ingress Protection Rating

IP30

REGULATORY & TYPE APPROVALS

Regulatory

CE/RED, EAC, RoHS, WEEE

EMI

Standards

Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0

ESD

EN 61000-4-2:2009

RS

EN 61000-4-3:2006 + A1:2008 + A2:2010

EFT

EN 61000-4-4:2012

Surge protection

EN 61000-4-5:2014

CS

EN 61000-4-6:2014

DIP

EN 61000-4-11:2004

RF

Standards

EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2

SAFETY

Standards

IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017
EN 50385:2017
EN 62232:2017