LTE CAT6 INDUSTRIAL CELLULAR ROUTER RUT360

MOBILE

Mobile module

4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps

Status

Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply

USSD

Supports sending and reading Unstructured Supplementary Service Data messages

Black/Whiles list (planned)

Operator black/white list

Multiple PDN

Possibility to use different PDNs for multiple network access and services

Band management

Band lock, Used band status display

APN

Auto APN

Bridge mode

Direct connection (bridge) between mobile ISP and device on LAN

WIRELESS

Wireless mode

802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)

WiFi security

WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation

ESSID

ESSID stealth mode

Wireless Hotspot

Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden

ETHERNET

WAN

1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover

LAN

1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover

NETWORK

Routing

Static routes, Dynamic routes (planned)

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned)

VoIP passthrough support

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring

Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

Port forwards, traffic rules, NAT rules, custom rules

DHCP

Static and dynamic IP allocation, DHCP Relay, Relayd

QoS / Smart Queue Management (SQM) (planned)

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS (planned)

Supported >25 service providers, others can be configured manually

Network backup

Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover

Load balancing

Balance Internet traffic over multiple WAN connections

SSHFS (optional)

Possibility to mount remote file system via SSH protocol (not available in standard FW)

SECURITY

Authetication

Pre-shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN

Tag based VLAN separation

Mobile quota control

Custom data limits for both SIM cards

WEB filter (planned)

Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN

Multiple clients and a server can run simultaneously, 12 encryption methods

OpenVPN Encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPSec

IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

GRE

GRE tunnel

PPTP, L2TP

Client/Server instances can run simultaneously, L2TPv3 support (planned)

Stunnel (planned)

Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN (planned)

Method of building scalable IPsec VPNs

SSTP (planned)

SSTP client instance support

ZeroTier

ZeroTier VPN client support

WireGuard

WireGuard VPN client and server support

MODBUS

MODBUS TCP SLAVE (PLANNED)

ID filtering

Respond to one ID in range [1;255] or any

Allow remote access

Allow access through WAN

Custom registers

Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality

MODBUS TCP MASTER (PLANNED)

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

MQTT GATEWAY (PLANNED)

Gateway

Allows sending commands and receiving data from Modbus Master trough MQTT broker

DATA TO SERVER (PLANNED)

Protocols

HTTP(S), MQTT, Azure MQTT, Kinesis

MONITORING & MANAGEMENT

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA

Firmware update from server, automatic notification

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call

Reboot, Status, Mobile data on/off, Output on/off

MQTT (planned)

MQTT Broker, MQTT publisher

SNMP (planned)

SNMP (v1, v2, v3), SNMP trap

JSON-RPC

Management API over HTTP/HTTPS

Modbus (planned)

Modbus TCP status/control

RMS

Teltonika Remote Management System (RMS)

IoT PLATFORMS

Clouds of things

Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx

Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity

Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP

Azure IoT Hub

Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

SYSTEM CHARACTERISTICS

CPU

QCA9531, MIPS 24kc, 650 MHz

RAM

128 MB, DDR2

FLASH storage

16 MB, SPI Flash (optional up to 256 MB)

FIRMWARE / CONFIGURATION

WEB UI

Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA

Update FW/configuration from server

RMS

Update FW/configuration for multiple devices at once

Keep settings

Update FW without losing current configuration

INPUT/OUTPUT

Configurable I/O

2 x Configurable digital Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA

Events

SMS, Email, RMS

POWER

Connector

4 pin industrial DC power socket

Input voltage range

9 - 30 VDC, reverse polarity protection, voltage surge/transient protection

Power consumption

10.5 W max

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet

2 x RJ45 ports, 10/100 Mbps

I/Os

2 x Configurable digital Inputs/Outputs on 4 pin power connector

Status LEDs

2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power

SIM

1 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders

Antenna

2 x SMA for LTE, 2 x RP-SMA for WiFi

Power

1 x 4 pin DC connector

Reset

Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

Casing material

Aluminium housing with DIN rail mounting option

Dimensions (W x H x D)

100 x 30 x 85 mm

Weight

247 g

Mounting options

DIN rail, flat surface placement

OPERATING ENVIRONMENT

Operating temperature

-40 C to 75 C

Operating humidity

10 % to 90 % non-condensing